Hebei Zhenghao Sports Goods Co., Ltd-Interlocking Sports Flooring Manufacturer, Modular Court Tiles Supplier, Suspended Flooring Factory

Misconception 1: Using a high-pressure water gun to forcefully clean thoroughly. Misconception: Believing that the higher the water pressure, the cleaner the rinse, especially for dust accumulation inside hollow grids. Te...

1、 The core reason for the arching problem is that the middle area of the site rises upwards, and when stepping on it, it feels hollow and floating. In severe cases, adjacent plates form a "human" shaped bend. one No re...

1、 The floor cannot be locked or the lock buckle is detached: during installation, the male buckle cannot be fully inserted into the female buckle slot, or after installation, the edge of the floor can be gently lifted ...

1、 The core contradiction of multifunctional venues and the adaptation logic of suspended flooring. The core problem faced by traditional multifunctional venues is that badminton requires high friction and suitable star...

1、 The essence of weather resistance: the synergistic aging of materials and structures. Outdoor weather resistance is not a single indicator, but a comprehensive reflection of multiple regions of materials, structural ...

1、 Basic condition acceptance before installation: Ground flatness should be measured using a 2-meter ruler, and the height difference between any two points should be controlled within 3mm. If it exceeds this range, se...

1. Impact absorption performance (the core indicator determining the safety of sports) This test simulates the impact force that athletes joints can withstand. Testing method: Use a spring impact hammer with a pressure se...

1. Basic structure layering: A standard suspended floor is not a solid flat plate, but is composed of a composite of an upper layer, a support layer, and a locking layer: the surface layer (surface layer) usually uses a "...